MSW sorting plant

Brief Analysis About The Technical Characteristics of Municipal Solid Waste Treatment Equipment

The solid waste management plant invented by Beston Group can truly realize the green production as well as greatly reduce waste pollution. Next, as for the technical characteristics of solid waste sorting machine, we will give a brief introduction. We hope that this news can provide you with more useful information and help you a lot at work.

Municipal Solid Waste Treatment Equipment
Municipal Solid Waste Treatment Equipment

1. During the sorting process, there is no any chemical additive, which has the characteristics of energy saving, lower production cost. Due to the characteristics of high moisture content, low calorific value of municipal solid waste in China, our solid waste recycling plant for sale has installed the dry device to remove the residual moisture, which can increase the caloric value and lay a solid foundation for the subsequent processing steps.

2. Integrating different waste treatment technologies, such as garbage classification treatment and waste recycling, will be beneficial for realizing the waste reclamation. Beston municipal solid waste treatment plant has changed the single treatment pattern, and it has combined with multinomial process technology such as pyrolysis and gasfication, burning with high efficiency, anaerobic digestion and RDF, through which we can convert various kinds of efficient components of solid waste into renewable resources. The end products obtained from our garbage sorting machine include RDF fuel, renewable plastic, construction materials, biogas fertilizer.

3. In addition, our MSW sorting plant has introduced comprehensive waste treatment methods, so as to efficiently decline waste discharge and secondary pollution. In this way, our waste sorting machine project can achieve the EU emission standard. Comprehensive treatment methods mainly include two kinds of technologies: the one is that before the processing of high temperature pyrolysis, our machine will utilize the ways of anaerobic digestion, RDF, recovered plastic recycling to reduce the harmful components of polyvinyl chloride, chorobenzene, chlorophenasic acid; the other one is that all useful organic materials will be processed by high temperature pyrolysis and high temperature burning to produce combustible gas, which can divide the organic materials of large molecules into combustible gas of small molecules, and at the same time, the residual materials will be further burned. By this method, it can turn the Cu, Fe of residual waste into additive. Besides, garbage disposal system can control the reaction condition of dioxin syhthesis.

MSW sorting plant
MSW sorting plant

4. The whole solid waste sorting system has realized mechanization and ran under the condition of fully automated and sealed, which has largely reduced the labor intensity and improved the working environment for workers. Our solid waste processing plant will not cause any pollution to surrounding environment. All parts of Beston sorting system have a fully sealed design and compartment operation. The pretreatment system of waste operates under the negative pressure. The odor of production line will be pumped to be burned in pyrolysis equipment. Our machine is also equipped with the electric control cabinet which can show all data of operation and testing. After the equipment operation and testing, the indicators of our machine have met and even exceeded national standards, so it has a better environmental efficiency and economic efficiency. At present, the pyrolysis technology of urban garbage energy and comprehensive utilization has entered the growth stage, and the market demand for technical equipment is quite considerable.